- 1,800W AC Output / 2,700W Power Lifting Mode
- AC180 : 1,152Wh Larger Capacity
- 9 Output Ports for Multiple Devices
- Flexible 4 Recharging Ways (AC/Solar/Car/Generator)
- Smart Control & Monitor with BLUETTI App
- 0-80% Recharging in 45Mins with 1,440W AC Input
- Eco-friendly/Clean/Quiet/Cost-
effective
-
-
The Megger MIT1025 10kV is a lightweight and compact insulation tester, used for diagnostics testing and maintenance of high voltage electrical equipment. It measures insulation resistance up to 20Tohm and offers tests such as polarisation index, dielectric absorption ratio, step voltage, dielectric discharge and ramp testing. Features: • Timed IR plus PI and DAR diagnostic tests • Operates with dead battery when on line power/mains • Rapid charge Li-ion battery : Up to 6 hours continuous testing (5kV) • Dedicated voltmeter function (30V to 660V) • Large LCD display with automatic backlight • Noise filter : Rejects up to 3mA noise • High altitude operation up to 3000m -
The Megger MIT525 5kV is a lightweight and compact insulation tester, used for diagnostics testing and maintenance of high voltage electrical equipment. It measures insulation resistance up to 10Tohm and offers tests such as Polarisation index, Dielectric Absorption Ratio, Step Voltage, Dielectric discharge and ramp testing. Features: • PI, DAR, DD, SV and ramp test • Improved productivity : operate from line power/mains if battery dead • Li-ion battery - extended capacity, rapid charge • Advanced memory with time/date stamp • Unique locking HV insulated plugs • Screened options for high noise environments • High-quality silicon double insulated cable -
When troubleshooting, commissioning or maintaining your equipment, this insulation tester from FLUKE keeps you covered. It measures the integrity of cable jackets and ensures your equipment is in the safe zone. The unit also automatically calculates polarisation indices and dielectric absorption ratios to save time and effort. Features: • Weighs 550g for easy handling • 600V RMS/DC overvoltage protection for added safety • Battery powered for use when you're on the go -
The CMC 356 is the universal solution for testing all generations and types of protection relays. Its powerful six current sources (three-phase mode: up to 64 A / 860 VA per channel) with a great dynamic range, make the unit capable of testing even high-burden electromechanical relays with very high power demands. The CMC 356 is the first choice for applications requiring the highest versatility, amplitude and power. Commissioning engineers will particularly appreciate its ability to perform wiring and plausibility checks of current transformers, by using primary injection of high currents from the test set. Features: • Powerful current sources for testing even high-burden electromechanical relays • High accuracy and versatility for testing static and numerical relays of all types • Integrated network for testing IEC 61850 IEDs • 10-channel analog measurement and transient recording functionality (option) -
The CMC 256plus is the first choice for applications requiring very high accuracy. This unit is not only an excellent test set for protection devices of all kinds but also a universal calibrator. Its high precision allows the calibration of a wide range of measuring devices, including: energy meters of class 0.2, measuring transducers, power quality measurement devices and phasor measurement units (PMU). Its unique accuracy and flexibility make the CMC 256plus ideal for protection and measurement equipment manufacturers for research and development, production and type testing. Features: • Protection test set and universal calibrator in one device • Testing of all relay generations – electromechanical, static, numerical, IEC 61850 • Highly accurate test signals. For meter testing: The sources are the reference – no additional reference meters are required • Integrated network for testing IEC 61850 IEDs • 10-channel analog measurement and transient recording functionality -
Arc flash protection systems are designed to detect arcs which occur during short-circuits in switchgear and to minimize the potential hazard to personnel and equipment by reducing the time of occurrence and disrupting the flow of energy feeding the arc flash. For testing such systems, the ARC 256x Arc Flash Initiator simulates an arc by a xenon tube, very similar to a camera flash. This CMC accessory is positioned close to the arc flash sensor during testing. Via its 6 m (19.7 ft) long connection cable it is connected to the external interface socket of the CMC test set, which provides both the supply voltage as well as the signal that will trigger the flash. Features: • It utilises a xenon flash tube to simulate arc flashes accurately for testing purposes. • It comes equipped with a 6-metre (19.7 ft) cable to connect to the external interface socket of the CMC test set, providing flexibility during testing. • The device is powered directly from the CMC test instrument, eliminating the need for additional power sources. • It’s compatible with various CMC test sets, including CMC 356, CMC 353 and CMC 256plus. • It boasts a compact design with dimensions of 40 x 20 x 80 mm and a weight of 215g, making it easy to transport and handle during testing. -
Yongnuo YN560 IV Flash Speedlite has built-in triggering system, so you can use it not only as a flash speedlite, but also as a flash controller. Great choice for multi-strobe setup for studio and on-location shooting. It is suitable for high intensity arc flash testing, e.g, ARC FLASH Protection Relays. Features: • Multiple Triggering Mode Supported – The YN560 IV can be triggered by the camera, 2.4G wireless triggering, S1 and S2 pre flash cancel mode. • Settings Save Automatically, Supports Custom Settings (Fn) – The parameters on the flash will be automatically saved when the flash is being turned off; the users can customize flash functions as needed • GN58 @ ISO100，105mm – Powerful flash with High Guide Number. Supports Manual and Multi modes • Sound Prompting System – When the sound prompting system is enabled, the different sound alerts will prompt different operating states of the flash, allowing you to focus on shooting • Support Electronic Zooming Function – The flash coverage can be altered between 24~105mm through the ZOOM button • Ultra fast Charging Recycle System, Supports External Power Supply Equipped with Big Size LCD Display Screen, Standard PC Synchronization Interface -
Designed to measure very low resistances of resistive types of objects. This product is made to be used in power plants, railways and maintenance companies, to measure welded and soldered connections, equipotential bondings, earthing conductors, contacts, bolted connections, windings of motors and power transformers and other resistive objects. MMR-640 can be also utilised on a production lines (eg. at the final production control stage). An innovative combination of a high-performance measuring device with a modern user interface and advanced data management system. Features: • Measurement of resistive loads • Rugged and weatherproof micro-ohmmeter • Resistance measurement from 0 to 2,000 ohms • Resolution 0.1 micro-ohms • Accuracy 0.25% • High noise immunity • 4-wire Kelvin probe measurement • Measuring voltage up to 10V • Limits and signalling set up • Li-ion Rechargeable battery • LCD Intuitive touch screen • IP67 • 600V CAT III • USB, WiFi, LAN -
The Megger DLRO10HD ohmmeter combines ultimate simplicity of operation with a rugged IP65 case and is designed for stable ground and bench operation. The unit is powered from either its rechargeable battery or line power making it suitable for continuous testing in production line/repetitive use environments. Rotary switch controls are simple and easy to operate in all weather conditions and with gloved hands. A large, clear, backlit LCD display is easy to read from a distance. Features: • Accuracy ±0.2% ±20 mΩ • Battery Type 6 V, 7Ah sealed lead acid • 90 – 264 V, 50-60 Hz • Weight 6.7 kg • Safety rating In accordance with IEC61010-1, CATIII 300 V when used with DH7 leads • Maximum lead resistance 100 mΩ total for 10 A operation irrespective of battery condition. -
The RMO-H micro ohmmeters are ideal for a number of applications for contact resistance measurements of non-inductive test objects. Typical applications are testing a circuit breakers and disconnecting switches, high-current bus bar joints, cable splices, welding joints, etc. The set is equipped with the thermal and overcurrent protection. The RMO-H has a very high ability to cancel electrostatic and electro-magnetic interference in HV electric fields. This is achieved by very efficient filtration utilizing a proprietary hardware and software. Features: • Measuring range: 0,1 μΩ – 3000 mΩ • Resolution: 0,1 μΩ • Typical accuracy: ± (0,1 % rdg + 0,1 % FS) up to 1Ω range • Handheld, only 0,95 kg (2.1 lbs) weight • IP54 mechanical protection rating • Designed to make multiple measurements and full day’s work of testing without a battery recharge • Safe testing in Both Sides Grounded (BSG) conditions • 1 meter cables -
The CP CU1 measures line impedances and k-factors on overhead lines and power cables. Ground impedances can also be determined on large systems with the CP CU1, as well as touch and step voltages. Mains frequency malfunctions do not influence the measurements, as the CP CU1 uses variable output frequencies for measurements. This enables extremely precise and reproducible measurement results. Features: • Measurement is not affected by mains frequency interference – extremely precise measurement results are obtained • Compliance with the strictest safety standards for overhead lines and cables connections – diverting currents up to 30 kA • Easy to handle – heaviest component: 29 kg • Automatic logging: Results are recorded automatically by the software -
The HGT1 is a handheld meter to measure ground impedance as well as step and touch voltages. Using the CP CU1, test currents at variable frequencies can be fed into power cables or overhead lines safely to simulate a ground fault. Step and touch voltages at various locations as well as fall-of-potential for determining the ground impedance are measured with PTM for HGT1 at the time of the test current injection. Features: • Mobile solution – simplifies measurements at various locations inside and outside the substation • Frequency-selective measurement for effective noise suppression • Simulation of body and shoe resistance for step and touch voltage testing • Even more powerful with Primary Test Manager™ (PTM) • Fully automated due to GPS test point tracking and test current detection • Real-time assessment of step and touch voltages according to EN 50522 or IEEE 80 -
The Ground Resistance Tester Model 6471 is a portable measurement instrument designed to measure Ground Resistance with 2 clamps (no auxiliary rods), Bond/Connection Resistance (2-Pole and 4-Pole Kelvin sensing), Ground Resistance (3-Pole or 4-Pole), Ground Coupling Resistance, and Selective Ground Resistance, Soil Resistivity (Wenner or Schlumberger method). The Model 6471 measures from 0.01 to 99.99kΩ and is auto-ranging, automatically seeking out the optimum measurement range, test frequency and test current. Features: • 2- and 4-pole bond resistance and continuity measurement capabilities with automatic polarity reversal for versatile testing • 3-pole fall-of-potential measurement, ensuring accurate ground resistance readings in varied environments • 4-pole soil resistivity automatically calculates Rho and allows selection between the Wenner or Schlumberger test methods. • Manual and automatic frequency scanning from 41 to 513 Hz to achieve optimal test accuracy, even in electrically noisy conditions. • Selectable test voltage of 16 or 32 V, with up to 250 mA of test current, catering to different testing requirements. • Can store up to 512 complete tests to facilitate comprehensive data collection and review. • Includes DataView software for remote setup and operation. • Rechargeable NiMH batteries can be charged using a wall charger or vehicle power -
CIBANO 500 combines a micro-ohmmeter, timing analyzer, and a coil and motor supply. All important CB tests on all types of CBs can be carried out even when a station battery is not available. Its globally unique connection technology reduces the wiring effort and time required up to 50 %. Minimised rewiring tasks result in very short testing times. The integrated power supply guarantees a safe and independent operation. Features: • 3-in-1 system: micro-ohmmeter, timing analyzer, and AC/DC power supply • One system for medium- or high-voltage circuit breakers with live-, dead-tank or GIS-design • Low wiring effort • One clear report for all tests • Circuit Breaker Testing Library (CBTL) • Lightweight test system (20 kg / 44.1 lbs) -
The Omicron CB TN3 is a transducer node used with the CIBANO 500 circuit breaker test system. It captures motion data from up to three linear or rotary motion transducers via three analog and three digital channels. This data is then transmitted digitally to the CIBANO 500, ensuring interference-free communication. The CB TN3 is essential for analysing circuit breakers’ performance, providing precise measurements for diagnostics and maintenance. It supports various standard transducers, making it a versatile tool for detailed motion analysis. Features: • Circuit breaker motion analysis — The Omicron CB TN3 provides detailed motion analysis of circuit breakers by capturing data from linear or rotary motion transducers. • Compatibility with transducers — It can be connected to most standard linear and rotary motion sensors, enhancing its versatility. • Fast linear motion measurement — It utilises a magnetic tape concept for quick and accurate measurement of linear motion. • Multi-channel support — Features three analog and three digital channels for comprehensive data acquisition. -
The ABB SACE PR010/T unit is an instrument capable of performing the functions of testing, programming and reading parameters for the protection units. For the specific functions, refer to the respective protection unit. The SACE PR010/T test unit uses a set of signals to perform its various testing, programming and reading functions. Features: • Offers the flexibility to conduct both automatic and manual testing. • Can be connected to a range of ABB SACE electronic relays, ensuring versatility across different types of electrical systems. • Capable of testing, programming and reading parameters for protection units. • Can monitor secondary inputs and verifying the programmed response of the circuit breaker. • Equipped to test both the hardware and software components of SACE relays, providing a thorough assessment of the relay’s overall health and functionality. • Designed with an intuitive interface for ease of use which the learning curve for new users. • The lightweight and robust construction makes it suitable for field use and easy to transport between different work sites. • Flexible power options with rechargeable batteries or an external power source. -
The Schneider 33595 FFTK is an advanced full-function test kit designed to comprehensively test circuit breakers and trip units. Its signal-injection box can operate independently or with a supporting PC, offering flexibility in various testing scenarios. Features: • Compatible with Micrologic, NT, STR and Masterpact trip units. • Operable independently or with a supporting PC. • Enables mechanical and electrical operation checks of circuit breakers. • Provides automatic/manual tests for protection functions. • Facilitates trip curve verification for circuit breakers. • Features data storage capability for test results. • Software compatible with Windows 95, 98 and NT -
Merlin Gerin ME Test Kit Secondary Injection Test Set is used for field testing MASTERPACT Circuit Breakers and COMPACT Circuit Breakers ST, STR, and STCM Trip Units. These trip units provide adjustable tripping functions on electronic trip circuit breakers. The STR23SP trip unit provides basic (LS) adjustable tripping functions. The STR53UP trip unit provides advanced adjustable tripping functions on NSJ and D-frame circuit breakers. Additional functionality is achieved through ground-fault and ammeter options. They are field replaceable to allow for upgrading trip unit functionality Features: • Injection Current 8 mA rms to 2820 mA rms current accuracy: • Maximum Injection Duration - Infinite if I < 120 mA rms (set the duration thumb wheels to 9999.99) Time setting accuracy: ± 1% • Input Power -110 Vac position: 100 Vac (–20%) to 127 Vac (+15%) - 220 Vac position: 200 Vac (–20%) to 240 Vac (+15%) - Frequency range: 50 to 60 Hz -
EcoStruxure Power Commission software is an intuitive, feature-rich tool that can help electrical professionals more effectively and efficiently setup, test & report, commission, and maintain LV circuit breakers and digital switchboards. Features: • Discover all circuit breakers in the electrical panel. • Confirm electrical settings and upgrade firmware for all LV circuit breakers. • Test and report on low-voltage circuit breakers and their trip curve behaviour during installation and maintenance and generate a report. • Secondary injection testing. • Compatible devices (Circuit breakers: MasterPact NT/NW; ComPact NS60b...1600 / ComPact NS1600b...3200; EasyPact MVS) • Provided Equipment: 1 Power Supply; 1 USB Cable; 3 Test Cables -
The ANU-1 OCR checker is an indispensable tool for field-testing overcurrent relays (OCRs). This compact, portable device can verify the operational integrity of OCRs by simulating fault conditions. It tests various functionalities, including long and short time-delay, instantaneous trips, ground fault trips and pre-trip alarms. Its user-friendly interface allows for quick and precise adjustments of current settings, ensuring comprehensive relay testing. Ideal for utility and industrial applications, the ANU-1 enhances maintenance efficiency by accurately assessing the performance of protective relays — contributing to the overall safety and reliability of electrical systems. Features: • Long- and short-time delay trip measurement capability. • Instantaneous and ground fault trip measurement. • Pre-trip alarm functionality. • OCR measurement without requiring control power. • Single connector for simplified OCR connection. • Clear LCD display for function, output phase and trip signal indicators. • Push-button switches for effortless operation. -
The Siemens 3WL ETU ACB Tester offers comprehensive testing capabilities for circuit breakers. It is engineered to measure operating circuit trip times and ensure protection functions for all phases and the neutral conductor. Additionally, the kit verifies the tripping solenoid’s functionality, checks ground-fault protection, and measures the breaker’s opening time. Features: • Suitable for applications from 16 A to 6300 A • Pixel-graphics display with intuitive, key-operated menu • Its small form factor makes it easy to transport -
Circuit Breaker Maintenance Kit provides the critical tools and equipment required to inspect and clean circuit breaker. It is important to maintain a good condition of a circuit breaker and other electrical equipment. Features: The CB maintenance kit contains the following: • Muti-purpose Lubrication. • Contact Cleaner. • Cleaning Tools such as, rugs, vacuum, sprays, and brushes. • Electrical Lubrication. -
The PFT-503CM(F) AC hipot test set provides continuously adjustable output voltages for overvoltage withstand testing of the following: Switchgear, Circuit breakers, Reclosers, Vacuum bottles, Hot sticks, Motor windings and other high voltage insulation requiring AC. Features: • Convenient one-piece field portable design • Secondary connected 2 Range Voltmeter: 0 - 25 / 50 kV AC • 3 Range Current Meter: 0 – 1 mA AC with x1, x10, and x100 multipliers • Fixed overload set to 120% of variable transformer rated output current • Transit protected meters prevent meter damage between test sites • Guard/Ground circuit for accurate leakage current measurement • 20 ft shielded output and return cables • Gapped core transformer design for capacitive load compensation • Zero Start and External safety Interlock provisions -
The most advanced HV test system available, with the highest output power of any unit available. Lightest, most compact instrument of its type available with control cabinet and HV generator all contained in one box. Offering variable frequency VLF output for testing of HV Cables and Switchgear, the operator can also select dual polarity DC and cable jacket or sheath testing output modes. The applied test voltage, current, capacitance, resistance and time are displayed and recorded. Easily programmable allowing test sequences in either automatic or manual mode. Capable of testing approx 3000m of cable at 0.1Hz and 60kV peak. At 0.02Hz, approx. 15,000m of cable can be tested. Features: • It’s expertly designed to be easily transported and used in various locations, from in-field testing sites to industrial labs. Its high power-to-weight ratio is unparalleled in the industry, providing great performance in a conveniently small package. • HVA60 can be extended to a complete cable diagnostic system at any time. • HVA test sets are constructed with non-arcing contacts and no need to change oil. This eliminates routine servicing and makes the test sets almost maintenance-free. • HVA generators are designed for continuous operation without any thermal limitations. • Pure sinusoidal output voltage (load-independent) • Breakdown voltage and load detection • Report downloads from the device via USB flash drive -
The BAUR Frida VLF Test Set is used for cable testing and cable sheath testing, with a maximum test voltage of 26kVrms. The FRIDA is an extremely low frequency tester which has been expertly designed to verify the condition of medium-voltage cables and electrical equipment such as generators and transformers, up to 20kV. VLF testing allows the user to locate insulation faults in plastic and paper-insulated mass-impregnated cables, in quickfire fashion, without impacting the quality of the surround insulating material. Features: • Suitable for continuous operation • Has a maximum test voltage of 26kVrms • Has the following voltage shapes: VLF truesinus, VLF square wave voltage, and DC voltage • Load-independent, reproducible sinusoidal high voltage by means of VLF truesinus testing technology • Cable testing according to: IEC 60060-3, IEC 60502.2, CENELEC HD 620/621 (DIN VDE 0276-620/621), IEEE 400-2012, IEEE 400.2-2013 • Cable sheath testing according to IEC 60502/IEC 60229 • Very low frequency tester for the verification of the condition of medium-voltage cables and electrical equipment up to 20kV • For use with test generators, transformers, and switchgear • Locate faults in plastic-and-paper insulated, mass-impregnated cables • Locate faults with ease and speed without damaging the surrounding materials • Automatic testing and diagnostic sequences • Quick and easy to set up • Transfer data via a USB interface • Automatic discharge unit • Compact and lightweight • A precise, portable and powerful high-voltage testing and diagnostics instrument -
A discharge stick is a safety device used to safely discharge residual high voltage from equipment like cables, transformers, or capacitors after testing or operation. It typically consists of an insulated shaft, a metal contact tip, an internal resistor, and a grounding cable. The resistor ensures controlled discharge to prevent sudden arcing, while the grounding cable directs the charge safely to earth. Discharge sticks are essential in high voltage testing environments, such as after VLF, DC, or AC withstand tests, to protect personnel from electric shock. Features • Voltage Rating: Up to 60kV, suitable for VLF-tested cables. • Insulated Shaft: Made of fiberglass or epoxy for high dielectric strength. • Internal Resistor: Safely bleeds charge, preventing sudden discharge or arcing. • Grounding Cable: Heavy-duty cable with clamp for secure ground connection. • Contact Tip: Metal hook or probe for reliable contact with test points. • Telescopic Design: Lightweight and portable for field use. • Insulated Grip: Non-slip handle with safety guard ring. • Standards Compliant: Meets IEC/ASTM safety standards. -
Made of a highly modified silicone rubber and protected by a thin-walled outer conductive screen connected to earth, connectors are equally suited for indoor and outdoor installation. Supporting a wide application range, the design incorporates one body and two stress cone adapters to cover all cross-sections from 25 to 300 mm2. The overall and cut-back dimensions are designed to take up minimum space in the terminal box. The connectors are equipped with a capacitive test point for determining whether the circuit is energised. This test point is protected by a conductive cap. After cable preparation and lubrication, the stress control adapter is simply slid into place, followed by the screened connector body. These two components can be installed under virtually any conditions. Features: • The insulation of the connector is made of a highly modified silicone rubber characterised by high tracking resistance, elongation at break and non-flammability. • A thin-walled screen is permanently bonded onto the insulation and protects the connection system against unintentional contact. • The screened connector need not be removed for oversheath testing. • The screened cable connector exceeds CENELEC HD 629.1 S2 requirements, which includes BS, VDE and other international specifications. • Design fits 630/1250 A bushings type “C” as specified by EN50180 and EN50181. • The compact design supports the use of double “T” connections inside standard terminal boxes. • The wide application range covers cable cross-sections from 25 to 300 mm2. • Conductor connection with mechanical or DIN lugs. • Easily accessible rear plug with capacitive test point. • Few accessories required for system test, double “T” and earth connection. • Complete kit including lugs facilitates installation and storage. -
The PD-TaD 62 portable PD diagnostics system is used in combination with a BAUR VLF generator for carrying out: • Partial discharge testing and location • VLF cable testing with parallel partial discharge testing • Parallel partial discharge and dissipation factor measurement • Full MWT With the partial discharge testing and the dissipation factor measurement, two effective and proven methods for evaluating the ageing condition of medium-voltage cables and cable accessories have been combined in a single compact and portable device. The result is a one-step 360° cable analysis with: early detection and localisation of weak points through a PD measurement, in addition to the evaluation of dielectric ageing based on the dissipation factor values. Features: • Comprehensive 360° cable analysis – with parallel partial discharge and dissipation factor measurement* • Time-optimised and safe cable condition evaluation • Lightweight and compact for mobile use on site -
The portable and high performance high-voltage testing and diagnostics device is available in two different configurations: viola: Used for cable and cable sheath testing of electrical equipment and medium-voltage cables up to 35 kV. Another function is insulation testing on electrical equipment. viola TD: Expands the functional scope of viola with the tan delta diagnostics and Monitored Withstand Test (MWT) that combines the cable testing and dissipation factor measurement. This allows for an accurate and comprehensive assessment of the cable condition. Features: • Cable testing and dissiation factor diagnostics in one device • High performance and compact • Easy and quick test setup • Automatic testing and diagnostic sequences -
Experience comprehensive assessment with our multi-sensor partial discharge (PD) testing technology. The UltraTEV Plus² is designed to handle a variety of PD types, including internal, surface, and corona. It's versatile enough to test different assets operating at various voltage levels. With its ability to employ multiple measurement techniques and a wide array of sensors, the UltraTEV Plus² ensures thorough testing and reliable PD detection across diverse assets. Features: • Compatible with a range of sensors - Accurately detect PD with Ultrasonic, TEV, UHF, HFCT • Generates Phase Resolved Partial Discharge (PRPD) plots - Enables easy identification and classification of PD • Wi-Fi connectivity - Conveniently synchronise survey results with asset management systems • Long battery life - Rechargeable Lithium-Ion battery -
Compact and portable, the PS2000 is your go-to power solution for short getaways, effortlessly charging from iTech World solar panels while on the move. Its cutting-edge battery protection and sleek design ensure a lightweight yet powerful performance, with lithium packs extending its shelf life for reliability in any situation. The PS2000 is equipped with a robust Lithium LiFePO4 battery, storing 2048Wh (160Ah), making it a convenient backup power storage solution. Whether you need to keep your devices charged or power essential equipment like lights, cameras, fridges, or a CPAP machine, the PS2000 Lithium offers versatile outputs, including a 2000 Watt pure-sine AC inverter to ensure you have power when you need it. Run your small 12V fridge directly to the PS2000 and operate it for approximately a week before needing to recharge. Additionally, appliances like coffee makers, microwaves, hair dryers, and others can be powered using the 240V inverter. Features: • 2000W Pure Sine Wave AC 240V output • 160Ah (2048Wh) Lithium LiFePO4 battery • Designed for camping, home backup and off grid trips • 5 ways to charge – 240V AC mains (home), car socket, solar, generator and additional battery • Run large appliances, coffee machines, microwaves and hairdryers • Charge from 0-80% in 1 hour via standard 240V wall plug • Pass through charging, which ensures you are able to fully utilise the PS2000 outputs while charging -
Designed for both indoor and outdoor scenarios, AC180 is highly capable as it has a capacity of 1,152Wh and continuous output of 1,800W. Thanks to its super-fast charging speed and portable design, it's a grab-and-go power station for numerous applications. The BLUETTI App is also available to make remote control and real-time monitoring incredibly convenient with just a few swipes on your phone. Features: • 1,800W AC Output / 2,700W Power Lifting Mode • AC180 : 1,152Wh Larger Capacity • 9 Output Ports for Multiple Devices • Flexible 4 Recharging Ways (AC/Solar/Car/Generator) • Smart Control & Monitor with BLUETTI App • 0-80% Recharging in 45Mins with 1,440W AC Input • Eco-friendly/Clean/Quiet/Cost-effective -
A variable auto transformer provides continuously adjustable AC voltage. In it's Auto transformer form it is an efficient, reliable method of controlling AC voltage from zero to line voltage by amplitude modulation of the AC waveform. Since the current, power, heat, light and motor speed are further functions of the voltage, the Dimmer Dot Variable Transformer finds its varied use, but is not designed to provide AC mains isolation. Features: • Light weight • Portable • Variable 0-270 Volt AC Output • Max load 10A • Air Cooled -
he TDK Lambda GEN150-1 is a high-performance, programmable 1500W DC power supply designed to meet the demands of various industrial, research, and development applications. It offers precise and reliable power delivery with an output voltage range of 0 to 150V and a maximum current output of 10A, allowing it to power a wide variety of loads. The GEN150-1 is part of the GEN series, known for its versatility, ease of use, and advanced features. Features: • Output voltage 0 to 150 V DC • Residual ripple voltage 10mVrms • Output current 0 to 10 A. • Ripple current 35mArms • Serial operation (max. 2 devices) • Parallel operation (max. 4 devices) • Setting for voltage / current via reliable encoders • 1,500 watts of output power • Wide range input 85-265 V AC • Constant voltage operation (CV) • Constant current operation (CC) • Surge protection (OVP) • Overcurrent protection (OCP) • Undervoltage limit (OVL) • Off / on switch of output • Last-setting memory • Sense • Built-in RS-232 / RS-485 interface • Built-in analog interface • 1 slot for optional interface • Device connection 230 V AC -
Range of measurements • Ratio and phase accuracy • Winding resistance • Excitation characteristics (knee points) • Composite error (ALF, ALFi, FS, FSi, Vb) • Burden impedance • Transient CT classes and parameters (TPS, TPX, TPY and TPZ type CTs) • Transient dimensioning factor (Ktd) • If missing/unknown: CT type, class, ratio, knee point, power factor, nominal burden, operating burden, primary and secondary winding resistance • Remanence and residual magnetism • Immediate Pass/Fail evaluation Features: • Highest measurement accuracy: 0.02 % / 1 min when calibrating on site • Very small and lightweight (< 8 kg / 17.4 lbs), easy to transport for on-site testing • Automatic evaluation according to IEC, IEEE and to customized or local/national standards • Short commissioning times (duration of the automatic test < 1min) • Excellent workplace safety - Tests run at max. 120 V • Integration into testing routines using Remote Interface Control
