-
A 100 kVA Genset refers to a 100 kilovolt-ampere (kVA) generator set, a piece of electrical equipment used to generate and supply electrical power for various applications. The rating "100 kVA" denotes the generator's capacity to provide up to 100,000 volt-amperes of electrical power, where kVA is a unit of apparent power (a combination of both active and reactive power). In simpler terms, the genset is capable of providing 100 kVA of electricity under full load conditions Features: • A 100 kVA genset typically provides 80 kW of usable power when operating at a power factor of 0.8. • Typically, a diesel engine. • A digital control panel is typically included, allowing the operator to monitor key parameters such as voltage, current, frequency, fuel levels, and runtime. • The genset is equipped with a radiator and cooling fan to regulate the engine's temperature during operation. -
The ABB SACE PR010/T unit is an instrument capable of performing the functions of testing, programming and reading parameters for the protection units. For the specific functions, refer to the respective protection unit. The SACE PR010/T test unit uses a set of signals to perform its various testing, programming and reading functions. Features: • Offers the flexibility to conduct both automatic and manual testing. • Can be connected to a range of ABB SACE electronic relays, ensuring versatility across different types of electrical systems. • Capable of testing, programming and reading parameters for protection units. • Can monitor secondary inputs and verifying the programmed response of the circuit breaker. • Equipped to test both the hardware and software components of SACE relays, providing a thorough assessment of the relay’s overall health and functionality. • Designed with an intuitive interface for ease of use which the learning curve for new users. • The lightweight and robust construction makes it suitable for field use and easy to transport between different work sites. • Flexible power options with rechargeable batteries or an external power source. -
The Ground Resistance Tester Model 6471 is a portable measurement instrument designed to measure Ground Resistance with 2 clamps (no auxiliary rods), Bond/Connection Resistance (2-Pole and 4-Pole Kelvin sensing), Ground Resistance (3-Pole or 4-Pole), Ground Coupling Resistance, and Selective Ground Resistance, Soil Resistivity (Wenner or Schlumberger method). The Model 6471 measures from 0.01 to 99.99kΩ and is auto-ranging, automatically seeking out the optimum measurement range, test frequency and test current. Features: • 2- and 4-pole bond resistance and continuity measurement capabilities with automatic polarity reversal for versatile testing • 3-pole fall-of-potential measurement, ensuring accurate ground resistance readings in varied environments • 4-pole soil resistivity automatically calculates Rho and allows selection between the Wenner or Schlumberger test methods. • Manual and automatic frequency scanning from 41 to 513 Hz to achieve optimal test accuracy, even in electrically noisy conditions. • Selectable test voltage of 16 or 32 V, with up to 250 mA of test current, catering to different testing requirements. • Can store up to 512 complete tests to facilitate comprehensive data collection and review. • Includes DataView software for remote setup and operation. • Rechargeable NiMH batteries can be charged using a wall charger or vehicle power -
The BAUR Frida VLF Test Set is used for cable testing and cable sheath testing, with a maximum test voltage of 26kVrms. The FRIDA is an extremely low frequency tester which has been expertly designed to verify the condition of medium-voltage cables and electrical equipment such as generators and transformers, up to 20kV. VLF testing allows the user to locate insulation faults in plastic and paper-insulated mass-impregnated cables, in quickfire fashion, without impacting the quality of the surround insulating material. Features: • Suitable for continuous operation • Has a maximum test voltage of 26kVrms • Has the following voltage shapes: VLF truesinus, VLF square wave voltage, and DC voltage • Load-independent, reproducible sinusoidal high voltage by means of VLF truesinus testing technology • Cable testing according to: IEC 60060-3, IEC 60502.2, CENELEC HD 620/621 (DIN VDE 0276-620/621), IEEE 400-2012, IEEE 400.2-2013 • Cable sheath testing according to IEC 60502/IEC 60229 • Very low frequency tester for the verification of the condition of medium-voltage cables and electrical equipment up to 20kV • For use with test generators, transformers, and switchgear • Locate faults in plastic-and-paper insulated, mass-impregnated cables • Locate faults with ease and speed without damaging the surrounding materials • Automatic testing and diagnostic sequences • Quick and easy to set up • Transfer data via a USB interface • Automatic discharge unit • Compact and lightweight • A precise, portable and powerful high-voltage testing and diagnostics instrument -
The PD-TaD 62 portable PD diagnostics system is used in combination with a BAUR VLF generator for carrying out: • Partial discharge testing and location • VLF cable testing with parallel partial discharge testing • Parallel partial discharge and dissipation factor measurement • Full MWT With the partial discharge testing and the dissipation factor measurement, two effective and proven methods for evaluating the ageing condition of medium-voltage cables and cable accessories have been combined in a single compact and portable device. The result is a one-step 360° cable analysis with: early detection and localisation of weak points through a PD measurement, in addition to the evaluation of dielectric ageing based on the dissipation factor values. Features: • Comprehensive 360° cable analysis – with parallel partial discharge and dissipation factor measurement* • Time-optimised and safe cable condition evaluation • Lightweight and compact for mobile use on site -
- 1,800W AC Output / 2,700W Power Lifting Mode
- AC180 : 1,152Wh Larger Capacity
- 9 Output Ports for Multiple Devices
- Flexible 4 Recharging Ways (AC/Solar/Car/Generator)
- Smart Control & Monitor with BLUETTI App
- 0-80% Recharging in 45Mins with 1,440W AC Input
- Eco-friendly/Clean/Quiet/Cost-
effective
-
Designed for both indoor and outdoor scenarios, AC180 is highly capable as it has a capacity of 1,152Wh and continuous output of 1,800W. Thanks to its super-fast charging speed and portable design, it's a grab-and-go power station for numerous applications. The BLUETTI App is also available to make remote control and real-time monitoring incredibly convenient with just a few swipes on your phone. Features: • 1,800W AC Output / 2,700W Power Lifting Mode • AC180 : 1,152Wh Larger Capacity • 9 Output Ports for Multiple Devices • Flexible 4 Recharging Ways (AC/Solar/Car/Generator) • Smart Control & Monitor with BLUETTI App • 0-80% Recharging in 45Mins with 1,440W AC Input • Eco-friendly/Clean/Quiet/Cost-effective -
Circuit Breaker Maintenance Kit provides the critical tools and equipment required to inspect and clean circuit breaker. It is important to maintain a good condition of a circuit breaker and other electrical equipment. Features: The CB maintenance kit contains the following: • Muti-purpose Lubrication. • Contact Cleaner. • Cleaning Tools such as, rugs, vacuum, sprays, and brushes. • Electrical Lubrication. -
The RMO-H micro ohmmeters are ideal for a number of applications for contact resistance measurements of non-inductive test objects. Typical applications are testing a circuit breakers and disconnecting switches, high-current bus bar joints, cable splices, welding joints, etc. The set is equipped with the thermal and overcurrent protection. The RMO-H has a very high ability to cancel electrostatic and electro-magnetic interference in HV electric fields. This is achieved by very efficient filtration utilizing a proprietary hardware and software. Features: • Measuring range: 0,1 μΩ – 3000 mΩ • Resolution: 0,1 μΩ • Typical accuracy: ± (0,1 % rdg + 0,1 % FS) up to 1Ω range • Handheld, only 0,95 kg (2.1 lbs) weight • IP54 mechanical protection rating • Designed to make multiple measurements and full day’s work of testing without a battery recharge • Safe testing in Both Sides Grounded (BSG) conditions • 1 meter cables -
Experience comprehensive assessment with our multi-sensor partial discharge (PD) testing technology. The UltraTEV Plus² is designed to handle a variety of PD types, including internal, surface, and corona. It's versatile enough to test different assets operating at various voltage levels. With its ability to employ multiple measurement techniques and a wide array of sensors, the UltraTEV Plus² ensures thorough testing and reliable PD detection across diverse assets. Features: • Compatible with a range of sensors - Accurately detect PD with Ultrasonic, TEV, UHF, HFCT • Generates Phase Resolved Partial Discharge (PRPD) plots - Enables easy identification and classification of PD • Wi-Fi connectivity - Conveniently synchronise survey results with asset management systems • Long battery life - Rechargeable Lithium-Ion battery -
When troubleshooting, commissioning or maintaining your equipment, this insulation tester from FLUKE keeps you covered. It measures the integrity of cable jackets and ensures your equipment is in the safe zone. The unit also automatically calculates polarisation indices and dielectric absorption ratios to save time and effort. Features: • Weighs 550g for easy handling • 600V RMS/DC overvoltage protection for added safety • Battery powered for use when you're on the go -
Convenient as an infrared thermometer, as insightful as a thermal imager, with the visual context of a digital camera. Using hyper-thin pyroelectric technology, Fluke discovered a way to push the limits of this technology pioneering an array dense enough to create an infrared heat map. In the past, blending has been the exclusive territory of thermal imagers priced five to ten times higher, but not anymore. It's standard with your new visual IR thermometer. Features: • Infrared thermometer with thermal imaging capabilities for noncontact surface temperature measurement for use in monitoring electrical, mechanical, industrial, HVAC, and automotive systems • Measures temperature from -10 to +250 degrees C (14 to 482 degrees F) with an accuracy of + or - 2 degrees C or + or - 2% of the reading, whichever is greater, and a thermal sensitivity of less than or equal to 250mK • Uncooled pyroelectric ceramic sensor captures thermal and visual images of the target and works at a minimum distance of 50cm • Thermal camera with LCD screen blends the visual and infrared images in 25% increments for inspection of full visual, incrementally blended, or full infrared images • Included SD memory card stores up to 10,000 images for inspection, analysis, and reporting on a computer
